Search Result of "computational fluid dynamics (CFD)"

About 51 results
Img
Img
Img
Img
Img

งานวิจัย

การเพิ่มขีดความสามารถของซอฟต์แวร์ทางพลศาสตร์ของไหลเชิงคำนวณเพื่อช่วยในการออกแบบทางวิศวกรรม (2006)

หัวหน้าโครงการ:Imgดร.วรางค์รัตน์ จันทสาโร, รองศาสตราจารย์

แหล่งทุน:ทุนอุดหนุนวิจัยมก.

ผลลัพธ์:วารสาร (4) ประชุมวิชาการ (2) วิจัย/สิ่งประดิษฐ์ (1)

Img

งานวิจัย

Numerical Simulation of R-410a Flow in a Scroll Compressor using Computational Fluid Dynamics - CFD (2020)

หัวหน้าโครงการ:Imgดร.วีรชัย ชัยวรพฤกษ์, รองศาสตราจารย์

ผู้ร่วมโครงการ:ImgJetsadaporn Priyadumkol, ImgKwanchai Chinwicharnam

แหล่งทุน:บริษัท สยามคอมเพรสเซอร์อุตสาหกรรม จำกัด

Img
Img

ผลงานตีพิมพ์ในวารสารวิชาการ

Effect of heat sink inlet and outlet flow direction on heat transfer performance

ผู้แต่ง:ImgThanathorn Hempijid, ImgDr.CHAWALIT KITTICHAIKARN, Associate Professor,

วารสาร:

Img Img Img

Img

ผลงานตีพิมพ์ในวารสารวิชาการ

Numerical study of propeller boss cap fins on propeller performance for Thai Long-Tail Boat

ผู้แต่ง:ImgDr.Prachakon Kaewkhiaw, Assistant Professor,

วารสาร:

Img Img

Img

ผลงานตีพิมพ์ในวารสารวิชาการ

Design of a Stacked-layer Tubular Photobioreactor for Microalgae Cultivation

ผู้แต่ง:ImgWimonmas Masomboon, ImgThanita Sonthisawate, ImgPirawat Thongjun, ImgDr.Thongchai Rohitatisha Srinophakun, Professor,

วารสาร:

Img

ที่มา:วิทยาสารเกษตรศาสตร์ สาขา วิทยาศาสตร์

หัวเรื่อง:ไม่มีชื่อไทย (ชื่ออังกฤษ : The k-? Turbulence Model to Simulate the Two-Phase Flows of Fluids in Flumes using C++ Open Source Code Computational Fluid Dynamic Software)

ผู้เขียน:Imgเอกชัย ชัยชนะศิริ, Imgนายชาคริต สุวรรณจำรัส, อาจารย์

สื่อสิ่งพิมพ์:pdf

Abstract

The governing equations of two-phase flows based on the k-? turbulence model were developed using open source computational fluid dynamic codes and open field operation and manipulation (OpenFOAM) software to simulate water flows in a flume. The water surface was modeled using the volume of fluid method with a turbulence model. The PISO (pressure implicit with splitting of operator) algorithm was used to solve the pressure-velocity coupling in the two-phase flows. The solutions of the simulations were validated using the experimental results as free surface profiles on the wall of the laboratory flume in transient and steady time periods. The transient time period started from when the water was distributed into the flume until it began to overflow the top of the weirs. The steady time period accounted for the water overflowing the weirs and the surface profiles did not change. It was found that the average error of the surface profiles in the transient and steady time periods obtained from the simulations was 8.94% and 8.06%, respectively.

Article Info
Agriculture and Natural Resources -- formerly Kasetsart Journal (Natural Science), Volume 047, Issue 3, May 13 - Jun 13, Page 460 - 477 |  PDF |  Page 

Img
Img

ที่มา:วิทยาสารเกษตรศาสตร์ สาขา วิทยาศาสตร์

หัวเรื่อง:ไม่มีชื่อไทย (ชื่ออังกฤษ : Diffusion Jet Flame Models Using Open Source Code CFD Software)

ผู้เขียน:Imgนายชาคริต สุวรรณจำรัส, อาจารย์, ImgPanya Aroonjarattham

สื่อสิ่งพิมพ์:pdf

Abstract

Open-source code software (OpenFOAM) based on computational fluid dynamics (CFD) was implemented and applied to simulate the diffusion of a jet flame. The large eddy simulation (LES) of the turbulence combustion model was written using the C++ language. The mixture fraction approach, an infinitely-fast chemistry assumption and radiative heat transfer were combined with this LES model. The finite volume method was performed to solve and simulate diffusion jet flame models under varying methane flow rates and environmental pressures. The results of the jet flame simulation comprising the percentage of maximum burning temperature, the heat release rate and oxygen from the oxygen fraction were defined to be the flame shape for validation with experiments. It was found that the flame length measured using the heat release rate from the results of simulations had the best agreement with the experiments. An average error of less than 5.84% was obtained by a comparison between the developed CFD model and the experiment when the CFD flame length was depicted by the heat release rate.

Article Info
Agriculture and Natural Resources -- formerly Kasetsart Journal (Natural Science), Volume 049, Issue 3, May 15 - Jun 15, Page 465 - 473 |  PDF |  Page 

Img

ที่มา:มหาวิทยาลัยเกษตรศาสตร์

หัวเรื่อง:การเพิ่มขีดความสามารถของซอฟต์แวร์ทางพลศาสตร์ของไหลเชิงคำนวณเพื่อช่วยในการออกแบบทางวิศวกรรม

Img

ผลงานตีพิมพ์ในวารสารวิชาการ

A Study of Dispersed Phenomena on Rushton and RushtonV-CUT

ผู้แต่ง:ImgVarit Kunopagarnwong1,, ImgWisarut Manasthammakul2,, ImgDr.Thongchai Rohitatisha Srinophakun, Professor,

วารสาร:

Img

Img

ผลงานตีพิมพ์ในวารสารวิชาการ

Mathematical Model for Agglomeration Process of Milk Powder

ผู้แต่ง:ImgSunatra Auamwong, ImgDr.Thongchai Rohitatisha Srinophakun, Professor,

วารสาร:

Img

Img

ที่มา:วิทยาสารเกษตรศาสตร์ สาขา วิทยาศาสตร์

หัวเรื่อง:ไม่มีชื่อไทย (ชื่ออังกฤษ : Implementation and Validation of k-? Turbulence Model using C++ Open Source Code Software for Thermal Dispersion in Domestic Water Heater)

ผู้เขียน:ImgWisuwat Matchika, Imgนายชาคริต สุวรรณจำรัส, อาจารย์

สื่อสิ่งพิมพ์:pdf

Abstract

The governing equations of the k-? turbulence model were implemented using open source computational fluid dynamic (CFD) codes and open field operation and manipulation (OpenFOAM) software to simulate the thermal dispersion between the water flow and the heater in a domestic water heater. The C++ language was used to develop the CFD codes. The QUICK (Quadratic Upstream Interpolation for Convection Kinetics) scheme was applied with the k-? turbulence model of the thermal dispersion and fluid flow. The SIMPLE (Semi-Implicit Method for Pressure-Linked Equations) algorithm was used to solve the pressure-velocity coupling under turbulence flow. The solutions of the simulations were validated using the experimental results. The transient temperatures at the outlet port of the domestic water heater were obtained using a data acquisition (DAQ) device via K-type thermocouple lines. Twelve cases of the CFD were performed in this study and produced an average error of less than 2.13% when the CFD temperatures were compared with the experimental temperatures.

Article Info
Agriculture and Natural Resources -- formerly Kasetsart Journal (Natural Science), Volume 048, Issue 3, May 14 - Jun 14, Page 498 - 514 |  PDF |  Page 

Img
Img
Img

การประชุมวิชาการ

Simulation of Cavitation on a Marine Propeller using CFD

ผู้แต่ง:ImgPrachakon Kaewkhiaw, ImgPramote Dechaumphai, ImgEkachai Juntasaro, ImgDr.Varangrat Juntasaro, Associate Professor,

การประชุมวิชาการ:

123